Hi!
I need information about connections FPGA programming by FX3. How FX3 SPI connected to FPGA.
In the hardware reference I saw "Additionally GPIO55 and GPIO56 of CypressTM EZ-USB FX3 are routed to the expansion connector J2.", as I know this pin it's a FX3 (MOSI, MISO).
For programming FPGA I need:
PROGRAM_B is present
INIT_B is present
CCLK not found
DIN not found
DONE is present
Like here cypress.com/file/179146/download page 3
Thanks!
Alex
I need information about connections FPGA programming by FX3. How FX3 SPI connected to FPGA.
In the hardware reference I saw "Additionally GPIO55 and GPIO56 of CypressTM EZ-USB FX3 are routed to the expansion connector J2.", as I know this pin it's a FX3 (MOSI, MISO).
For programming FPGA I need:
PROGRAM_B is present
INIT_B is present
CCLK not found
DIN not found
DONE is present
Like here cypress.com/file/179146/download page 3
Thanks!
Alex