OS X UDK3 DRIVER FOR EFM02

    • OS X UDK3 DRIVER FOR EFM02

      Will the OS X version of the EFM02 driver will soon be available ?

      Today I downloaded the Cypress FX3 SDK . It seems that from the SDK point of view there are only few differences between the Linux and the OsX source code.
      In case I will try to manage the EFM02 board directly using the FX3 OS X SDK , are there EFM02 constraints or things that must I be aware about , in order to not damage it or wrongly loose information on the device ?
      Regards
      Giovanni

    • Hello,
      the OS X support is still experimental and based on libusb and does not require the FX3 SDK. The FX3 follows the USB 3.0 standard, so transfers can't destroy someting. But a wrong downloaded firmware can destroy all connected peripherals.
      What are you plan to do with the EFM-02 on OS X ? You can write this as email if it contains sensitive information,

      best regards,
      Thomas
      Software development
      Cesys GmbH