I had your PCIeV4BASE board and CESYS UDK Version 1.15 software installed and working well on another PC. I wanted to switch to a newer one so I copied the folder with all your software to the new machine. I also copied the PLX RDK / SDK software to the new machine because I have that board too. I plugged the PCIeV4BASE board into the new PC and started it up. When the Windows New Hardware Found Wizard came up I directed it without thinking to the PLX driver (version 5.2) in C:\PLX\PlxSDK\Windows\Driver. The PLX PLXMON program sees your PCIeV4Base board but when I try any of your applications like Cesys-TestBench.exe or any of the other .EXE files in C:\CESYS_UDK\pciev4base\windows they all give an error like this: "C:\CESYS_UDK\pciev4base\windows\cesys-TestBench.exe This application has failed to start becausethe application configuration is incorrect. Reinstalling the application may solve the problem."
When I realized I must be using the wrong driver I used control panel | system | hardware | device manager to unintall the PLX driver which had been attached to your board and then shut down Windows and installed your driver when the New Hardware Found Wizard came up. But that did not fix it. What shoud I do?
Dave
When I realized I must be using the wrong driver I used control panel | system | hardware | device manager to unintall the PLX driver which had been attached to your board and then shut down Windows and installed your driver when the New Hardware Found Wizard came up. But that did not fix it. What shoud I do?
Dave