Manfred Kraus Moderator

I also need to know the steps for programming the bit file or MCS file in to FPGA or Flash for the efm02.

Hello mayuresh! Cesys offers demo FPGA designs in VHDL, but not in Verilog, please see forum.cesys.com/index.php/Thread/9-DEMO-FPGA-Designs/. For the VHDL reference designs for EFM-02, please visit forum.cesys.com/index.php/Thre…reference-designs-and-IP/. For the UDK3 tools download please visit forum.cesys.com/index.php/Thre…-Cesys-UDK3-Download-1-3/. One of these UDK3 tools is the UDK3 Board Manager which can download an FPGA design to the EFM-02 device. The user guide of the UDK3 board manager can be found at cesys.com/download/fpga/. Best regards, Manfred R.

Thank you so much sir.

Dear sir, good evening. this is mayuresh, we have been working on EDM02 kit. We need some more information on it. 1) Actually the issue is with the USB3.0, we need to communicate EFM02 board with our windows based software(C# and .NET) with USB3.0 for that which DLL we could use and also it would helpful from you, if you guys provide us the Transceiving sample codes for the same.

Actually, we had manufactured the 50 boards as same as urs and we had got stuck with this problem. So PLEASE HELP US FOR THE SAME. I WILL BE WAITING TO SEE YOUR REPLY SOON!!