Cesys support Forum for FPGA boards and CEBO DAQ

Hello Jinqi, since you do not describe your connection between EFM-03 and the PC with Vivado, I assume your only connection is the USB port of the EFM-03. But you cannot use this USB connection to connect the Vivado hardware manager to the EFM-03. The…

Hi! Can I have any instructions from you to use ILA Vivado on EFM-03 for debugging purpose? I connected the board, but the hardware manager on Vivado cannot detect the device. Many thanks! Jinqi

Dear hjq310, The bitstream used to initialize the Artix-7 FPGA must be specifically generated for the intended initialization process and its "boot device". If you want to want to generate a version of the FPGA reference design bitstream that boots from…

Hi! I wrote a simple user led program(to light up the user led) to see if it can be downloaded to EFM-03. When I used function "Program FPGA" in UDK3 board manager, the user led worked to show that it was successfully downloaded. When I removed the…

Hello hjq310, there can be a number of reasons why you get this error message. I have some questions for you to help me assist you: 1. Which operating system do you use? Windows, Linux, which version? 2. If you use Windows and connect the EFM-03 to…

Hi! When I followed the instructions in UG104 trying to learn how to use UDK3 performance monitor, it said "no matching device is detected". Can you think of any reasons for this issue? Many thanks!